High-quality Boom Cylinder Seal Kit 7219801280 721-98-01280 Fits PC55MR-5 PC45MR-5 Komatsu
| Products Name | 7219801280 721-98-01280 Boom Cylinder Seal Kit |
| Material | PU , Rubber , PTFE , NBR , HNBR , ACM , VMQ |
| Model Number | Komatsu PC55MR-5 PC45MR-5 |
| Sample | Available |
| Payment Terms | Western Union, Paypal, TT, Transfer |
| Supply Ability | 4000 Piece/Pieces per Month |
| MOQ | 1 SET(negotiation) |
| Feature | Abrasion Resistant, Oil Resistance, High Chemical Resistance |
| Brand Name | Suncar/ OEM |
| CertifiC.A.Tion | ISO9001:2000 |
| Shipping Mode | By air, by sea ,by express (DHL, Fedex, UPS ,TNT etc.) |
| Size | Standard Size |
Product Show:
Related Part:
| POS. | Number | Name | Qty. |
| K11 | 721-98-01280 | Seal Kit, Boom Cylinder | |
| | 02896-11012 | • O-ring | 2 |
| | 02896-11015 | • O-ring | 1 |
| | 07000-12085 | • O-ring | 2 |
| | 07000-12090 | • O-ring | 1 |
| | 07145-00050 | • Seal, Dust | 4 |
| | 07156-00912 | • Ring, Wear | 1 |
| | 707-35-10860 | • Ring, Back-up | 3 |
| | 707-44-90180 | • Ring, Piston | 1 |
| | 707-51-50211 | • Packing, Rod | 1 |
| | 707-56-50740 | • Seal, Dust | 1 |
FAQ:
Q1: Are you a trading company or a manufacturer?
A: We are a trading company, and we also have our own factory to produce seals with more than 10 years of production experience.
Q2: What if I only know the model of the excavator? But I can't provide the part number, what should I do?
A: If possible, you can send pictures of old products, labels or sizes for reference.
Q3: What should I do if there is a problem with the product?
A: First of all, I have confidence in the quality of our products. If you find any problem please provide us the picture, we will check after confirmation, please reply us and we will provide you the correct item.
Common failure causes and improvement measures of seals:
Rubber compression rate For rubber rings used for low friction motion, in order to reduce the friction and pick resistance, the design requirements stipulate that a smaller compression rate should be selected, generally 5% to 8%. Excessive compression rate will cause large shear deformation, while the resistance to shear deformation of the rubber seal ring is much smaller than the resistance to compression deformation, which increases the sliding friction and permanent deformation of the rubber seal, damages the surface and reduces the amount of compression. In severe cases, the friction will quickly cause damage to the surface of the rubber seal, resulting in seal failure.
Seal groove, in any case, the area of the square groove is larger than the cross-sectional area of the O-ring. The volume increase caused by the expansion of the O-ring must be considered. Therefore, the assembled rubber seal and groove must be It is necessary to leave a proper gap between the walls, but the gap should not be too large, otherwise it will become a harmful gap under the action of alternating pressure, which will increase the wear of the seal. Generally, the groove design should follow the The following principles: the height of the groove is 0.7~0.8 times the width of the groove, and the cross-sectional diameter of the O-ring seal is between 1.3 and 1.35 times the height of the groove.
Product Tags:
|
|
High-quality Boom Cylinder Seal Kit 7219801280 721-98-01280 Fits PC55MR-5 PC45MR-5 Komatsu Images
|
